SPARE PARTS
- ELECTRONICS
CODE
DESCRIPTION
IMAGE
01.CH.01015 (for lenght 15mm)
01.CH.01025 (for lenght 25mm)
01.CH.01040 (for lenght 40mm)AISI303 stainless steel electrodes suitable for timber moisture testing; provided with Ø 4 mm hole for banana plugs.
Length electrode: 15, 25 and 40mm01.CH.02015 (for lenght 15mm)
01.CH.02025 (for lenght 25mm)
01.CH.02040 (for lenght 40mm)AISI303 stainless steel electrodes suitable for timber moisture testing; provided with Ø 4 mm hole for banana plugs.
Easily placed and removed thanks to its threaded tip.
Length electrode: 15, 25 and 40mm01.SB.00084
Connectors made of AISI303 stainless steel, Ø 4 mm, with special rubber insulation.
01.PC.01050 (for Pack 50Pcs)
01.PC.01100 (for Pack 100Pcs)Standard Cellulose plates for the equilibrium moisture measurement inside the chamber.
In packs of 50 and 100 units.01.PC.02050 (for Pack 50Pcs)
01.PC.02100 (for Pack 100Pcs)High Performance Cellulose plates for the measuring equilibrium moisture inside the chamber. In packs of 50 and 100 units.
WARNING: plates compatible only with control system SIRIO 9000 and SIRIO 8800.01.CS.01006 (for lenght 6mt)
01.CS.01008 (for lenght 8mt)
01.CS.01010 (for lenght 10mt)Silicon cable for measuring wood moisture with double terminations and banana plugs.
Cable with low permeability for optimal measures even at low humidity.
Lenght Cable: 6, 8 and 10mt.01.CS.02006 (for lenght 6mt)
01.CS.02008 (for lenght 8mt)
01.CS.02010 (for lenght 10mt)Teflon cable for measuring wood moisture with double terminations and banana plugs.
Cable with low permeability for optimal measures even at low humidity.
Lenght Cable: 6, 8 and 10mt.01.BS.00113 (3 Wood Humidity)
01.BS.00114 (4 Wood Humidity)
01.BS.00116 (6 Wood Humidity)Aluminum probes box:
(1EMC + 1 Temperature + 3 Wood Humidity)
(1EMC + 1 Temperature + 4 Wood Humidity)
(1EMC + 1 Temperature + 6 Wood Humidity) - FAN
CODE
DESCRIPTION
IMAGE
02.MT.23003 (for 3Kw)
02.MT.23004 (for 4Kw)Electric motor Three-phase IP56 class H suitable to work inside the kiln dryers.
Motors 230/400V 50Hz, 3Kw or 4Kw.02.GR.00800 (for ø800)
02.GR.00900 (for ø900)Axial fan in die-cast aluminum, reversible and at high performance. Axial fan diameter: ø800 and ø900.
02.CN.00800 (for ø800)
02.CN.00900 (for ø900)Stainless steel conveyor with double radial board. Conveyor diameter: ø800 e ø900.
- SERVOMOTORS
CODE
DESCRIPTION
IMAGE
03.SR.00245 (for 24V)
03.SR.02305 (for 230V)Servomotor for air exhaust system in 24V or 230V with 5Nm of torque.
03.SR.02410 (for 24V)
03.SR.23010 (for 230V)Servomotor for air exhaust system in 24V or 230V with 10Nm of torque.
03.SR.02420 (for 24V)
03.SR.23020 (for 230V)Servomotor for air exhaust system in 24V or 230V with 20Nm of torque.
- HYDRAULIC
CODE
DESCRIPTION
IMAGE
04.VA.02440 (for DN40)
04.VA.02450 (for DN50)
04.VA.02465 (for DN65)
04.VA.02480 (for DN80)Three-Way Valve for hot water and superheated water up to 120°C with motor in 24V.
Three-Way Valve diameter: DN40, DN50, DN65 and DN80.04.VA.23040 (for DN40)
04.VA.23050 (for DN50)
04.VA.23065 (for DN65)
04.VA.23080 (for DN80)Three-Way Valve for hot water and superheated water up to 120°C with motor in 230V.
Three-Way Valve diameter: DN40, DN50, DN65 and DN80.04.VV.02440 (for DN40)
04.VV.02450 (for DN50)
04.VV.02465 (for DN65)Two-Way Valve for steam up to 150°C with motor in 24V.
Two-Way Valve diameter: DN40, DN50 and DN65.04.SM.00024 (for 24V)
04.SM.00230 (for 230V)Servomotor for Three-Way Valve and Two-Way Valve, in 24V or 230V with 1000N of force drive.
04.SP.01012 (for 1/2″)
04.SP.01034 (for 3/4″)Standard sprayer with support for piping and filter anti-drip. Sprayer for 1/2″ pipe and 3/4″ pipe.
04.SP.02012 (for 1/2″)
04.SP.02034 (for 3/4″)Completely Stainless Steel sprayer with support for piping and filter anti-drip. Sprayer for 1/2″ pipe and 3/4″ pipe.
04.ES.00012
Electro-valve (1/2″) for the spraying system with 24V coil and connector.
- RUBBER
CODE
DESCRIPTION
IMAGE
05.GP.00001
Special rubber seal for Monobloc door and hinged door.
To get an offer of one or more of these spare parts, please fill in the following form: